White Goods

Dryer Wall Mount Adelaide

Free up laundry floor space with a secure wall-mounted dryer installation. We supply the bracket and ensure perfect leveling from $179.

  • Universal wall bracket supplied
  • Secure stud/masonry anchoring
  • Venting setup if required
  • Inverted mounting supported
  • Same-day bookings in Adelaide
Why a Proper Install

Plasterboard Alone Won't Hold It

A loaded dryer can weigh 60kg and vibrates constantly. Anchored into plasterboard alone, it will eventually pull free. We always find real studs first.

Stud-Mounted Only

Dryers can weigh 40–60kg. We always mount into structural wall studs — never plasterboard anchors alone.

Correct Venting

Venting routed outside or to a condenser kit — no moisture build-up in your laundry.

Space Saving

Wall mounting frees up floor space under the dryer for storage or laundry troughs.

All Brands

LG, Samsung, Fisher & Paykel, Bosch, Miele, Simpson — we know each brand's bracket spec.

Condenser Kit Option

No outside wall access? A condenser vent kit is fitted instead so moisture is still managed properly.

Inverted Mount Available

High or inverted mounting handled for tight laundries and unusual layouts.

Washer and dryer side by side in a bright modern laundry room
Bright laundry room with washer and dryer ready for wall mounting
About This Service

What We Do

We wall-mount your dryer on structural wall studs — never on plasterboard anchors alone. A dryer weighing 40–60kg needs a bracket screwed into actual timber. We also route the vent correctly so moisture doesn't build up in your laundry.

  • Always mounted into structural wall studs — plasterboard-only anchors cannot hold a 40–60kg dryer safely
  • Model-matched bracket sourced for your specific dryer so the fit is correct and the warranty stays valid
  • Vent hose routed to the exterior wall or connected to a condenser kit — no moisture in your laundry
  • All brands installed: LG, Samsung, Fisher & Paykel, Bosch, Miele and Simpson
Why Choose Us

Adelaide's Dryer Wall Mount Specialists

Always Stud-Mounted

A 40–60kg dryer never goes on plasterboard anchors alone — we locate and mount into real studs.

Model-Matched Bracket

The correct bracket for your exact dryer model, so the fit is right and your warranty stays valid.

Moisture-Free Venting

Vented outside or to a condenser kit — never left to dump moisture into your laundry.

All Brands & Walls

LG, Samsung, Fisher & Paykel, Bosch, Miele, Simpson — plasterboard, brick or masonry.

Experienced Local Team

Hundreds of dryers wall-mounted across Adelaide metro laundries and apartments.

Fixed, Upfront Pricing

The price you're quoted is the price you pay — no surprise per-bracket or 'while we're here' fees.

Bright laundry room with wicker storage baskets
Washer and dryer under a wooden counter with fresh flowers
The Process

How We Mount Your Dryer

From locating studs to a full load test — here's exactly how it comes together.

Bright home laundry room with washer and dryer
01

Studs Located

We locate structural wall studs at the correct height and mark the bracket position.

02

Bracket Fitted

Model-matched bracket screwed securely into the studs, checked for level.

03

Dryer Lifted & Secured

The dryer is lifted onto the bracket and locked in place — a two-person job done safely.

04

Vent Connected

Vent hose routed outside or connected to a condenser kit, sealed to stop moisture escaping into the wall cavity.

05

Power-On Test

A full load test run to confirm the dryer runs quietly and securely before we leave.

Need a new power point or condenser vent kit too? Add it at booking — see Add-Ons below.

Add-Ons

Optional Extras

Add any of these at booking — same options and pricing as our online quote form.

Old Dryer Removal

+$39

Removal and disposal of your old dryer.

Condenser Vent Kit

+$69

Condenser vent kit fitted where outside venting isn't possible.

Brick / Masonry Wall Mount

+$49

Additional labour for anchoring into a brick or masonry wall.

New Power Point Nearby

+$89

New switched power point installed for the dryer.

Model-Matched Bracket Supply

+$59

Correct wall bracket sourced for your specific dryer model.

Inverted / High Mount

+$39

Additional labour for mounting higher or in an inverted position.

Priority Same-Day Service

+$49

Priority booking slot for same-day installation.

Reviews

What Adelaide Homeowners Say

4.9 average from 74+ Google reviews

Studs located and bracket fitted perfectly. Never once wobbled even fully loaded, and we got our floor space back.

Tegan L. Klemzig

Vent routed straight outside so there's zero moisture in the laundry now. Clean job, no shortcuts taken.

Marcus H. Woodville Park

Old dryer removed and new one mounted with a proper model-matched bracket. Warranty stayed intact, exactly what we needed.

Priya N. Newton

Peace of Mind

Our Guarantee & Insurance

3-Year Workmanship Guarantee

If a bracket ever comes loose because of how we installed it, we'll come back and fix it at no charge — for three full years after your install.

Fully Licensed & Insured

Every technician carries $20M public liability insurance and is police-checked, so your home is covered on every single job.

We're Local

Adelaide owned and operated — not a call centre interstate. Local techs mean faster response times and installers who actually know your area.

Ready to Free Up Your Laundry Floor?

Get an instant fixed price in under 60 seconds — no obligation, no waiting for a callback.